Positions

Publications

Academic Article

Year Title
2017 Numerical investigation of CP-Ti & Cu110 impact welding using smoothed particle hydrodynamics and arbitrary Lagrangian-Eulerian methodsJournal of Manufacturing Processes.  28:558-564. 2017
2016 Shear instability of plastically-deforming metals in high-velocity impact weldingJournal of the Mechanics and Physics of Solids.  95:351-373. 2016
2016 Residual Ductility and Microstructural Evolution in Continuous-Bending-under-Tension of AA-6022-T4.Materials.  9:130-130. 2016
2015 Arbitrary Lagrangian-Eulerian finite element simulation and experimental investigation of wavy interfacial morphology during high velocity impact weldingMaterials and Design.  88:345-358. 2015
2015 Formability Enhancement in Titanium Tube-Flaring by Manipulating the Deformation PathJournal of Manufacturing Science and Engineering, Transactions of the ASME.  137:051006-051006. 2015
2015 Investigation of thermal and mechanical effects during electrically-assisted microbendingJournal of Materials Processing Technology.  221:1-12. 2015
2015 Analysis of Fiber Optic Sensor to Measure Velocities During High Deformation Rate Material Forming ProcessesJournal of Manufacturing Science and Engineering, Transactions of the ASME.  137:031013-031013. 2015
2015 Analytical design and experimental validation of uniform pressure actuator for electromagnetic forming and weldingJournal of Materials Processing Technology.  215:251-263. 2015
2014 Numerical and Experimental Investigations of Key Assumptions in Analytical Failure Models for Sheet Metal FormingJournal of Manufacturing Science and Engineering, Transactions of the ASME.  136:011013-011013. 2014
2014 Spatial stability analysis of emergent wavy interfacial patterns in magnetic pulsed weldingCIRP Annals - Manufacturing Technology.  63:245-248. 2014
2013 Development of a biaxial loading frame for sheet metalJournal of Manufacturing Processes.  15:580-585. 2013
2013 Effect of specimen planar area on electromagnetic flangingJournal of Manufacturing Processes.  15:194-200. 2013
2013 Investigation of electroplastic effect at high deformation rates for 304SS and Ti-6Al-4VCIRP Annals - Manufacturing Technology.  62:279-282. 2013
2013 Preface for Advances in Materials Forming Special IssueJournal of Manufacturing Processes.  15:181-182. 2013
2012 Investigation of Strain Gradients and Magnitudes During MicrobendingJournal of Manufacturing Science and Engineering, Transactions of the ASME.  134:041011-041011. 2012
2011 Advances in Plastic Forming of MetalsJournal of Manufacturing Science and Engineering, Transactions of the ASME.  133:060301-060301. 2011
2011 Effect of Element Types on Failure Prediction Using a Stress-Based Forming Limit CurveJournal of Manufacturing Science and Engineering, Transactions of the ASME.  133:061002-061002. 2011
2011 Effect of Severe Prior Deformation on Electrical-Assisted Compression of Copper SpecimensJournal of Manufacturing Science and Engineering, Transactions of the ASME.  133:064502-064502. 2011
2011 Electromagnetic forming-A reviewJournal of Materials Processing Technology.  211:787-829. 2011
2010 Experimental Investigation of Grain and Specimen Size Effects During Electrical-Assisted FormingJournal of Manufacturing Science and Engineering, Transactions of the ASME.  132:021004-021004. 2010
2010 Deformation Size Effects Due to Specimen and Grain Size in MicrobendingJournal of Manufacturing Science and Engineering, Transactions of the ASME.  132:011018-011018. 2010
2010 Effect of current density and zinc content during electrical-assisted forming of copper alloysCIRP Annals - Manufacturing Technology.  59:299-302. 2010
2010 Prediction of Strain Gradient Hardening During MicroextrusionMaterials and Manufacturing Processes.  25:769-776. 2010
2009 Improvements in Spatial Ability as a Result of Targeted Training and Computer-Aided Design Software Use: Analyses of Object Geometries and Rotation TypesJournal of Engineering Education.  98:157-167. 2009
2008 Analysis of self-efficacy and ability related to spatial tasks and the effect on retention for students in engineeringInternational Journal of Engineering Education.  24:488-494. 2008
2006 Effect of yield criterion on numerical simulation results using a stress-based failure criterionJournal of Engineering Materials and Technology, Transactions of the ASME.  128:436-444. 2006
2004 Wrinkling behavior of laminated steel sheetsJournal of Materials Processing Technology.  151:133-140. 2004
2004 A methodology to reduce and quantify wrinkling in Tailor Welded Blank formingInternational Journal of Materials and Product Technology.  21:154-168. 2004
2003 An analytical model for tailor welded blank formingJournal of Manufacturing Science and Engineering, Transactions of the ASME.  125:344-351. 2003
2003 Experimental implementation of neural network springback control for sheet metal formingJournal of Engineering Materials and Technology, Transactions of the ASME.  125:141-147. 2003
2000 A novel forming technology for tailor-welded blacksJournal of Materials Processing Technology.  99:145-153. 2000
2000 Consistent and minimal springback using a stepped binder force trajectory and neural network controlJournal of Engineering Materials and Technology, Transactions of the ASME.  122:113-118. 2000
2000 Rapid design of corner restraining force in deep drawn rectangular partsInternational Journal of Machine Tools and Manufacture.  40:113-131. 2000
Response of Carbon Nanotube (CNT) Ply Subjected to a Pulsed Magnetic Field

Conference Proceeding

Year Title
2017 Analytical model and experimental investigation of electromagnetic tube compression with axi-symmetric coil and field shaperCIRP Annals - Manufacturing Technology. 273-276. 2017
2016 Numerical studies on high-velocity impact welding: smoothed particle hydrodynamics (SPH) and arbitrary Lagrangian-Eulerian (ALE)Journal of Manufacturing Processes. 376-381. 2016
2016 Closed-loop control of product properties in metal formingCIRP Annals - Manufacturing Technology. 573-596. 2016
2007 Investigation of deformation size effects during microextrusionJournal of Manufacturing Science and Engineering, Transactions of the ASME. 690-697. 2007
2007 Comparison of analytical model to experimental and numerical simulations results for tailor welded blank formingJournal of Manufacturing Science and Engineering, Transactions of the ASME. 211-215. 2007
2001 Next generation stamping dies - controllability and flexibilityRobotics and Computer-Integrated Manufacturing. 49-56. 2001

Principal Investigator On

  • EPSCoR RII-Track 1 NH Center for Multiscale Modeling and Manufacturing  awarded by National Science Foundation (NSF) 2018 - 2023
  • Next Generation of Deep Drawing Using Smart Observers, Closed-Loop Control, and 3D-Servo-Press  awarded by National Science Foundation (NSF) 2017 - 2020
  • RET SITE: Rise UP  awarded by National Science Foundation (NSF) 2017 - 2020
  • Collaborative Research-GOALI: Fundamental Studies on Interface Structures and Properties from Impact Welding Across Varying Length Scales  awarded by National Science Foundation (NSF) 2015 - 2019
  • GOALI: Fundamental Studies and Modeling of High Impact Pressure, Supersonic Water Droplets (HIP-SWaD) for Material Deformation and Removal  awarded by National Science Foundation (NSF) 2015 - 2019
  • High Velocity Forming of Micro-Truss Structures  awarded by Oregon State University 2018
  • University of New Hampshire Planning Grant: I-UCRC for Metal Deformation Processes  awarded by National Science Foundation (NSF) 2016 - 2018
  • RET Site: Research to Inspire Student in Engineering (RISE) through Inquiry  awarded by National Science Foundation (NSF) 2011 - 2017
  • GOALI: Continuous-Bending-Under-Tension Studies to Enhance the Formability of Advanced Steels and Aluminum Alloys  awarded by National Science Foundation (NSF) 2013 - 2017
  • Data Center Airflow Optimization Through Measurements and Modeling  awarded by A S H R A E 2015 - 2017
  • NIST Summer Undergraduate Research Fellowships 2016  awarded by US DOC, National Institute of Standards and Technology 2016
  • Characterization, Modeling, and Optimization of Magnetic Pulsed Welding Processes  awarded by National Science Foundation (NSF) 2009 - 2013
  • Department of Energy Intergovernmental Personnel Agreement  awarded by US DOE, Department of Energy 2013
  • Development of Hyperplastic and Superplastic Microforming Processes and Related Educational Activities  awarded by National Science Foundation (NSF) 2007 - 2013
  • NIST SURF Nguyen and Normandeau  awarded by US DOC, National Institute of Standards and Technology 2011
  • Exploitation of an Experimentally Characterized Stress Based Failure Criterion to Advance Sheet Metal Forming  awarded by National Science Foundation (NSF) 2007 - 2011
  • MRI: Acquisition of Digital Imaging Correlation System to Advance Research, Teaching, and Education in Engineering  awarded by National Science Foundation (NSF) 2008 - 2011
  • Microforming Processes Fundamental Studies & Developments  awarded by National Science Foundation (NSF) 2004 - 2008
  • Spatial Ability STEM Undergraduate Students  awarded by National Science Foundation (NSF) 2004 - 2008
  • An Innovative Approach to Fabricate and Functionalize Block Copolymer Templates  awarded by University of Massachusetts at Lowell 2005 - 2007
  • Devising & Implementing a CAD Integrated Physical Model  awarded by American Society for Engineering Education 2002 - 2003
  • Marty Richmond Lecture Series  awarded by New Hampshire Charitable Foundation
  • Teaching Activities

  • CEPS Industrial Experience Taught course 2018
  • Doctoral Research Taught course 2018
  • Machine Shop Training Taught course 2018
  • Machine Shop Training Taught course 2018
  • Machine Shop Training Taught course 2018
  • Machine Shop Training Taught course 2018
  • Machine Shop Training Taught course 2018
  • Machine Shop Training Taught course 2018
  • Machine Shop Training Taught course 2018
  • Doctoral Research Taught course 2018
  • Machine Shop Training Taught course 2018
  • Machine Shop Training Taught course 2018
  • Master's Project Taught course 2018
  • Projects Taught course 2018
  • Rsrch Exp/Mechanical Engr Taught course 2018
  • Solid Mechanics Manufacturing Taught course 2018
  • Solid Mechanics Manufacturing Taught course 2018
  • Solid Mechanics Manufacturing Taught course 2018
  • Machine Shop Training Taught course 2018
  • Machine Shop Training Taught course 2018
  • Doctoral Research Taught course 2017
  • Intro Eng Design & Solid Model Taught course 2017
  • Introduction to Solid Modeling Taught course 2017
  • Introduction to Solid Modeling Taught course 2017
  • Machine Shop Training Taught course 2017
  • Machine Shop Training Taught course 2017
  • Machine Shop Training Taught course 2017
  • Machine Shop Training Taught course 2017
  • Machine Shop Training Taught course 2017
  • Machine Shop Training Taught course 2017
  • Machine Shop Training Taught course 2017
  • CEPS Industrial Experience Taught course 2017
  • Doctoral Research Taught course 2017
  • Machine Shop Training Taught course 2017
  • Machine Shop Training Taught course 2017
  • Machine Shop Training Taught course 2017
  • Machine Shop Training Taught course 2017
  • Machine Shop Training Taught course 2017
  • Intro Eng Design & Solid Model Taught course 2016
  • Introduction to Solid Modeling Taught course 2016
  • Machine Shop Training Taught course 2016
  • Machine Shop Training Taught course 2016
  • Machine Shop Training Taught course 2016
  • Machine Shop Training Taught course 2016
  • Machine Shop Training Taught course 2016
  • Master's Project Taught course 2016
  • Intro Eng Design & Solid Model Taught course 2016
  • Intro Eng Design & Solid Model Taught course 2016
  • Intro Eng Design & Solid Model Taught course 2016
  • Introduction to Solid Modeling Taught course 2016
  • Machine Shop Training Taught course 2016
  • Machine Shop Training Taught course 2016
  • Machine Shop Training Taught course 2016
  • Machine Shop Training Taught course 2016
  • Machine Shop Training Taught course 2016
  • Machine Shop Training Taught course 2016
  • Machine Shop Training Taught course 2016
  • Machine Shop Training Taught course 2016
  • Machine Shop Training Taught course 2016
  • Engineering Internship Taught course 2015
  • Intro Eng Design & Solid Model Taught course 2015
  • Introduction to Solid Modeling Taught course 2015
  • Machine Shop Training Taught course 2015
  • Machine Shop Training Taught course 2015
  • Machine Shop Training Taught course 2015
  • Machine Shop Training Taught course 2015
  • Machine Shop Training Taught course 2015
  • Machine Shop Training Taught course 2015
  • Machine Shop Training Taught course 2015
  • Machine Shop Training Taught course 2015
  • Machine Shop Training Taught course 2015
  • Machine Shop Training Taught course 2015
  • Machine Shop Training Taught course 2015
  • Machine Shop Training Taught course 2015
  • Machine Shop Training Taught course 2015
  • Machine Shop Training Taught course 2015
  • Solid Mechanics Manufacturing Taught course 2015
  • Machine Shop Training Taught course 2015
  • Machine Shop Training Taught course 2015
  • Engineering Internship Taught course 2014
  • Intro Eng Design & Solid Model Taught course 2014
  • Introduction to Solid Modeling Taught course 2014
  • Machine Shop Training Taught course 2014
  • Machine Shop Training Taught course 2014
  • Machine Shop Training Taught course 2014
  • Engineering Internship Taught course 2014
  • Machine Shop Training Taught course 2014
  • Machine Shop Training Taught course 2014
  • Machine Shop Training Taught course 2014
  • Machine Shop Training Taught course 2014
  • Machine Shop Training Taught course 2014
  • Machine Shop Training Taught course 2014
  • Machine Shop Training Taught course 2014
  • Machine Shop Training Taught course 2014
  • Solid Mechanics Manufacturing Taught course 2014
  • Engineering Internship Taught course 2013 - 2014
  • Education And Training

  • B.S. Mechanical Engineering, University of Michigan
  • M.S. Mechanical Engineering, Northwestern University
  • Ph.D. Mechanical Engineering, Northwestern University
  • Full Name

  • Brad Kinsey