Residual Ductility and Microstructural Evolution in Continuous-Bending-under-Tension of AA-6022-T4.

Academic Article

Abstract

  • A ubiquitous experiment to characterize the formability of sheet metal is the simple tension test. Past research has shown that if the material is repeatedly bent and unbent during this test (i.e., Continuous-Bending-under-Tension, CBT), the percent elongation at failure can significantly increase. In this paper, this phenomenon is evaluated in detail for AA-6022-T4 sheets using a custom-built CBT device. In particular, the residual ductility of specimens that are subjected to CBT processing is investigated. This is achieved by subjecting a specimen to CBT processing and then creating subsize tensile test and microstructural samples from the specimens after varying numbers of CBT cycles. Interestingly, the engineering stress initially increases after CBT processing to a certain number of cycles, but then decreases with less elongation achieved for increasing numbers of CBT cycles. Additionally, a detailed microstructure and texture characterization are performed using standard scanning electron microscopy and electron backscattered diffraction imaging. The results show that the material under CBT preserves high integrity to large plastic strains due to a uniform distribution of damage formation and evolution in the material. The ability to delay ductile fracture during the CBT process to large plastic strains, results in formation of a strong <111> fiber texture throughout the material.
  • Authors

  • Zecevic, Milovan
  • Roemer, Timothy J
  • Knezevic, Marko
  • Korkolis, Yannis P
  • Kinsey, Brad
  • Publication Date

  • February 26, 2016
  • Published In

  • Materials  Journal
  • Keywords

  • aluminum alloys
  • anisotropy
  • continuous-bending-under-tension
  • crystallographic texture
  • ductility
  • voids
  • Digital Object Identifier (doi)

    Start Page

  • 130
  • End Page

  • 130
  • Volume

  • 9
  • Issue

  • 3