Positions

Publications

Academic Article

Year Title
2018 Comparison of stress-based failure criteria for prediction of curing induced damage in 3D woven composites.  Composite Structures.  189:366-377. 2018
2017 Measuring Failure Stress of RTM6 Epoxy Resin under Purely Hydrostatic Tensile Stress using Constrained Tube Method.  Experimental Techniques.  41:45-50. 2017
2016 Curing cycle modification for RTM6 to reduce hydrostatic residual tensile stress in 3D woven composites.  Journal of Applied Polymer Science.  133:n/a-n/a. 2016
2012 Effective stiffness and thermal expansion coefficients of unidirectional composites with fibers surrounded by cylindrically orthotropic matrix layers.  International Journal of Engineering Science.  58:129-143. 2012
2011 Tension-compression anisotropy of in-plane elastic modulus for pyrolytic carbon.  Carbon.  49:2145-2147. 2011
2008 Finite element modeling of diffusional creep with explicit consideration of enhanced vacancy diffusivity in a finite region adjacent to the grain interface.  Mechanics of Advanced Materials and Structures Mechanics of Composite Materials and Structures.  15:533-539. 2008
2002 Detection of plasma-induced, nanoscale dielectric constant variations in carbon-doped CVD oxides by electrostatic force microscopy.  Journal Physics D: Applied Physics.  35:723-728. 2002
2002 Finite element predictions of the effect of diffusion-accommodated interfacial sliding on thermal stresses in Cu/polymer dielectric and Cu/oxide dielectric single level damascene interconnect structures.  Journal of Electronic Packaging, Transactions of the ASME.  124:12-21. 2002
2001 Two-dimensional, electrostatic finite element study of tip-substrate interactions in electric force microscopy of high density interconnect structures..  Ultramicroscopy.  87:147-154. 2001
1997 The influence of composition on the properties of pH-swellable polymers for chemical sensors.  Sensors and Actuators, B: Chemical.  45:1-9. 1997
1995 AN INVESTIGATION OF TIRE-WHEEL INTERFACE LOADS USING ADINA.  Computers and Structures.  56:377-387. 1995
1991 Three-illumination-beam phase-shifted holographic interferometry study of thermally induced displacements on a printed wiring board..  Applied Optics.  30:1617-1623. 1991
1991 CRACK FORMATION DURING LASER CUTTING OF SILICON.  Journal of Applied Physics.  69:983-989. 1991
1990 DEFORMATION - FOREWORD.  Journal of Electronic Materials.  19:857-857. 1990
1987 HIGH-TEMPERATURE (900-DEGREES-C-1300-DEGREES-C) MECHANICAL-BEHAVIOR OF DENDRITIC WEB GROWN SILICON RIBBONS - STRAIN RATE AND TEMPERATURE-DEPENDENCE OF THE YIELD STRESS.  Scripta Metallurgica.  21:117-122. 1987
1986 EFFECT OF LOAD RATIO ON CRACK TIP CYCLIC PLASTIC WORK - EVIDENCE FOR FRICTIONAL WORK.  Scripta Metallurgica.  20:1713-1716. 1986
1986 TENSILE PROPERTIES OF CZOCHRALSKI GROWN SILICON FROM 900-1200-DEGREES-C.  Scripta Metallurgica.  20:1677-1682. 1986
1986 HUMID AIR EFFECTS ON CRACK TIP PLASTIC WORK IN 1008 STEEL.  Fatigue and Fracture of Engineering Materials and Structures.  9:49-56. 1986
1985 FRICTIONAL EFFECTS IN MODE-III FATIGUE CRACK-PROPAGATION.  Scripta Metallurgica.  19:1185-1188. 1985

Principal Investigator On

  • MRI: Acquisition of Analytical SEM for Engineering and Earth Science Research  awarded by National Science Foundation (NSF) 2013 - 2015
  • Low Cost, High Bandwidth, and Non-intrusive Machining Force Measurement System  awarded by National Science Foundation (NSF) 2009 - 2013
  • Interconnect Processing Enhancement Nanoscale Dielectric  awarded by National Science Foundation (NSF) 2003 - 2007
  • NHIRC: Optical Fiber Stripping Process Development  awarded by NH Department of Resources & Economic Development (DRED) 2001 - 2005
  • Sidewall Dielectric Damage by RIE  awarded by Semiconductor Research Corporation 1997 - 2000
  • IRC TAG: Copper Vapor Laser Cutting  awarded by NH Department of Resources & Economic Development (DRED) 1998 - 1999
  • Evaluation of Cu Vapor Laser Cutting of EFG Silicon  awarded by ASE Americas, Inc. 1997 - 1999
  • Nanoscale Deformation of High Density Interconnects  awarded by National Science Foundation (NSF) 1995 - 1999
  • Electric Field Measurment by SPM - Nanoscale Effects  awarded by Semiconductor Research Corporation 1996 - 1998
  • Fracture Surface Roughness Effect on Shear Crack Growth  awarded by US DOE, Department of Energy 1989 - 1997
  • Travel Support for Hans Weertman Symposium  awarded by National Science Foundation (NSF) 1994 - 1996
  • Joint Study Agreement  awarded by IBM Corporation 1994 - 1995
  • Polyimide Properties for Multi-Chip Module Substrates  awarded by University of Massachusetts 1991 - 1995
  • Atomic Force Microscope Facility  awarded by Miscellaneous Business & Industry 1992 - 1993
  • Determination of Residual Stresses in EFG Silicon  awarded by Miscellaneous Business & Industry 1992 - 1993

    • Investigator On

    Teaching Activities

  • Exper Measurement & Data Analy Taught course 2019
  • Exper Measurement & Data Analy Taught course 2019
  • Exper Measurement & Data Analy Taught course 2019
  • Exper Measurement & Data Analy Taught course 2019
  • Exper Measurement & Data Analy Taught course 2019
  • Exper Measurement & Data Analy Taught course 2019
  • Exper Measurement & Data Analy Taught course 2019
  • Exper Measurement & Data Analy Taught course 2019
  • Exper Measurement & Data Analy Taught course 2019
  • Intro to Materials Science Taught course 2018
  • Intro to Materials Science Taught course 2018
  • Exper Measurement & Data Analy Taught course 2018
  • Exper Measurement & Data Analy Taught course 2018
  • Exper Measurement & Data Analy Taught course 2018
  • Exper Measurement & Data Analy Taught course 2018
  • Exper Measurement & Data Analy Taught course 2018
  • Exper Measurement & Data Analy Taught course 2018
  • Exper Measurement & Data Analy Taught course 2018
  • Exper Measurement & Data Analy Taught course 2018
  • Intro to Materials Science Taught course 2017
  • Intro to Materials Science Taught course 2017
  • Exper Measurement & Data Analy Taught course 2017
  • Exper Measurement & Data Analy Taught course 2017
  • Exper Measurement & Data Analy Taught course 2017
  • Exper Measurement & Data Analy Taught course 2017
  • Exper Measurement & Data Analy Taught course 2017
  • Exper Measurement & Data Analy Taught course 2017
  • Exper Measurement & Data Analy Taught course 2017
  • Intro to Materials Science Taught course 2016
  • Intro to Materials Science Taught course 2016
  • Mechanical Behavior Materials Taught course 2016
  • Exper Measurement & Data Analy Taught course 2016
  • Exper Measurement & Data Analy Taught course 2016
  • Exper Measurement & Data Analy Taught course 2016
  • Exper Measurement & Data Analy Taught course 2016
  • Exper Measurement & Data Analy Taught course 2016
  • Exper Measurement & Data Analy Taught course 2016
  • Exper Measurement & Data Analy Taught course 2016
  • Honors Seminar Taught course 2016
  • Rsrch Exp/Mechanical Engr Taught course 2016
  • Fracture& Fatigue Eng Material Taught course 2015
  • Intro to Materials Science Taught course 2015
  • Exper Measurement & Data Analy Taught course 2015
  • Exper Measurement & Data Analy Taught course 2015
  • Exper Measurement & Data Analy Taught course 2015
  • Exper Measurement & Data Analy Taught course 2015
  • Exper Measurement & Data Analy Taught course 2015
  • Exper Measurement & Data Analy Taught course 2015
  • Exper Measurement & Data Analy Taught course 2015
  • Exper Measurement & Data Analy Taught course 2015
  • Intro Eng Design & Solid Model Taught course 2014
  • Intro Eng Design & Solid Model Taught course 2014
  • Intro Eng Design & Solid Model Taught course 2014
  • Intro Eng Design & Solid Model Taught course 2014
  • Intro Eng Design & Solid Model Taught course 2014
  • Exper Measurement & Data Analy Taught course 2014
  • Exper Measurement & Data Analy Taught course 2014
  • Exper Measurement & Data Analy Taught course 2014
  • Exper Measurement & Data Analy Taught course 2014
  • Exper Measurement & Data Analy Taught course 2014
  • Exper Measurement & Data Analy Taught course 2014
  • Exper Measurement & Data Analy Taught course 2014
  • Exper Measurement & Data Analy Taught course 2014
  • Honors Seminar Taught course 2014

    • Education And Training

  • B.S. Metallurgy and Materials Science, Carnegie Mellon University
  • Ph.D. Materials Science and Engineering, Northwestern University

    • Full Name

  • Todd Gross

    • Mailing Address

  • University of New Hampshire

    Mechanical Engineering

    33 Academic Way Kingsbury Hall W101

    Durham, NH  03824

    United States