Positions

Publications

Academic Article

Year Title
2015 Cutting temperature effect on PCBN and CVD coated carbide tools in hard turning of D2 tool steelInternational Journal of Refractory Metals and Hard Materials International Journal of Refractory & Hard Metals.  50:1-8. 2015
2014 The Effect of Cr Content on the Oxidation Behavior of Ti-Cr-N FilmsCoatings.  4:308-319. 2014
2014 Wear mechanisms of several cutting tool materials in hard turning of high carbon-chromium tool steelTribology International.  70:148-154. 2014
2013 The Effects of Substrate Bias and Edge Proximity on the Mechanical Properties and Machining Performance of TiN-Coated Carbide InsertsJournal of Materials Engineering and Performance.  22:1611-1618. 2013
2012 Surface morphology and texture of TiAlN/CrN multilayer coatingsThin Solid Films.  524:100-106. 2012
2012 Structural and tribological characterization of Ti-In-N films deposited by magnetron sputter depositionJournal of Materials Research.  27:850-856. 2012
2011 Highly active iridium/iridium-tin/tin oxide heterogeneous nanoparticles as alternative electrocatalysts for the ethanol oxidation reaction.Journal of the American Chemical Society.  133:15172-15183. 2011
2010 Mechanisms of self-lubrication in patterned TiN coatings containing solid lubricant microreservoirsSurface and Coatings Technology.  204:2392-2399. 2010
2009 Fabrication and tribological properties of composite coatings produced by lithographic and microbeading methodsSurface and Coatings Technology.  204:955-961. 2009
2009 Machining performance of TiN coatings incorporating indium as a solid lubricantSurface and Coatings Technology.  203:3370-3376. 2009
2008 Fabrication and tribological properties of titanium nitride coatings incorporating solid lubricant microreservoirsSurface and Coatings Technology.  202:2023-2032. 2008
2007 Low and increased solubility of silicon in metal nitrides: evidence by X-ray absorption near edge structureJournal of Materials Science Interface Science Journal of Materials Science Letters.  42:7607-7610. 2007
2007 X-ray absorption spectroscopy study at the SiK-edge of tungsten carbide-silicon carbide thin filmsScripta Materialia Nanostructured Materials.  56:1011-1014. 2007
2006 Microstructure and mechanical properties of Mo-Si-C and Zr-Si-C thin films: Compositional routes for film densification and hardness enhancementSurface and Coatings Technology.  201:2942-2952. 2006
2005 Structural disordering in WC thin films induced by SiC additionsMetallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science).  36A:3055-3063. 2005
2004 The effects of substrate bias on phase stability and properties of sputter-deposited tungsten carbideMaterials Letters.  58:3437-3440. 2004
2004 Pulsed laser-ablated MoS2-Al films: friction and wear in humid conditionsSurface and Coatings Technology.  187:326-335. 2004
2004 Composite coatings incorporating solid lubricant phasesJournal of Materials Engineering and Performance.  13:439-444. 2004
2004 Phase formation and phase separation in multiphase thin film hard coatingsSurface and Coatings Technology.  188:376-383. 2004
2002 Nanostructure and mechanical properties of WC-SiC thin filmsJournal of Materials Research.  17:3163-3167. 2002
2002 Magnetron sputter deposition of WC-Ag and TiC-Ag coatings and their frictional properties in vacuum environmentsScripta Materialia Nanostructured Materials.  47:613-618. 2002
2002 Microstructure and vacuum tribology of TiC-Ag composite coatings deposited by magnetron sputtering-pulsed laser depositionSurface and Coatings Technology.  157:95-101. 2002
2002 Phase formation and microstructure in sputter-deposited Ti-Mo-C and Ti-W-C thin filmsMetallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science).  33:1579-1588. 2002
2002 Structural and mechanical properties of TiC/Ti and TiC/B4C multilayers deposited by pulsed laser depositionJournal of Materials Research.  17:1390-1398. 2002
2001 Preferential growth of Ti and TiN films on Si(111) deposited by pulsed laser depositionApplied Surface Science.  174:132-137. 2001
2001 Mechanical properties of sputter-deposited titanium-silicon-carbon filmsJournal of the American Ceramic Society.  84:672-674. 2001
2001 Structural and mechanical properties of TiC and Ti-Si-C films deposited by pulsed laser depositionJournal of Vacuum Science and Technology A: Vacuum, Surfaces and Films.  19:2252-2258. 2001
2001 Structure and mechanical properties of Ti-Si-C coatings deposited by magnetron sputteringJournal of Vacuum Science and Technology A: Vacuum, Surfaces and Films.  19:1912-1918. 2001
2000 Heavy metal stabilization in municipal solid waste combustion bottom ash using soluble phosphateWaste Management.  20:135-148. 2000
1998 The effect of thin film structure and properties on gold ball bondingJournal of Electronic Materials.  27:1211-1215. 1998
1998 An analytical electron microscopy investigation of municipal solid waste incineration bottom ashJournal of Materials Research.  13:28-36. 1998
1998 Characterization and phosphate stabilization of dusts from the vitrification of MSW combustion residuesWaste Management.  18:513-524. 1998
1997 A microstructural study of dislocation substructures formed in metal foil substrates during ultrasonic wire bondingMetallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science).  28:2663-2671. 1997
1997 Heavy metal stabilization in municipal solid waste combustion dry scrubber residue using soluble phosphateEnvironmental Science & Technology.  31:3330-3338. 1997
1997 Chemical, mechanical, and tribological properties of pulsed-laser-deposited titanium carbide and vanadium carbideJournal of the American Ceramic Society.  80:1277-1280. 1997
1995 Characterization of Fe-supersaturated Fe-Al bronze coatings fabricated by magnetron sputter depositionMaterials Characterization.  35:207-212. 1995
1995 Comprehensive Approach toward Understanding Element Speciation and Leaching Behavior in Municipal Solid Waste Incineration Electrostatic Precipitator Ash.Environmental Science & Technology.  29:629-646. 1995
1991 THE EFFECT OF COMPOSITION PROFILE SHAPE ON THE STRENGTH OF METALLIC MULTILAYER STRUCTURESScripta Metallurgica et Materialia.  25:1465-1470. 1991
1990 DEFORMATION - FOREWORDJournal of Electronic Materials.  19:857-857. 1990
1990 DEFORMATION AND BONDING PROCESSES IN ALUMINUM ULTRASONIC WIRE WEDGE BONDINGJournal of Electronic Materials.  19:919-928. 1990
1990 A TRANSMISSION ELECTRON-MICROSCOPY STUDY OF ULTRASONIC WIRE BONDINGIEEE Transactions on Components, Hybrids and Manufacturing Technology.  13:176-181. 1990
1989 NICKEL ENRICHMENT NEAR GRAIN-BOUNDARIES IN CHILL CAST NI3AL ALLOYS AND ITS RELATION TO GRAIN-BOUNDARY COHESIVE STRENGTHScripta Metallurgica.  23:1219-1224. 1989
1988 THE EFFECTS OF HEAT-TREATMENT AND COLD-WORKING ON THE ROOM-TEMPERATURE AND CRYOGENIC MECHANICAL-PROPERTIES OF FE-30MN-9AL-0.9C STEELMetallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science).  19:1873-1876. 1988
1987 INTERNAL STRUCTURE OF A NEW MICROCONSTITUENT OBSERVED IN CARBURIZED-9310 STEELScripta Metallurgica.  21:39-44. 1987
1986 SOLUTE-DRAG EFFECTS AT MIGRATING DIFFUSE INTERFACES .1. THEORETICAL-ANALYSIS AND APPLICATION TO APBS IN FE-AL ALLOYSActa Metallurgica.  34:1035-1044. 1986
1986 SOLUTE-DRAG EFFECTS AT MIGRATING DIFFUSE INTERFACES .2. EXPERIMENTAL INVESTIGATION OF APB MIGRATION KINETICS AND COMPARISON TO THEORYActa Metallurgica.  34:1045-1050. 1986
1984 SEGREGATION TO STATIC AND MIGRATING DIFFUSE ANTIPHASE BOUNDARIESSurface Science.  144:153-175. 1984
1983 THE MIGRATION KINETICS OF ANTI-PHASE BOUNDARIES WETTED BY A 2ND PHASEActa Metallurgica.  31:213-222. 1983

Conference Proceeding

Year Title
2017 Structure and morphology of stainless steel coatings sputter-deposited in a nitrogen/argon atmosphereSurface and Coatings Technology. 105-112. 2017
2017 Simulation and optimization of a soft gamma-ray concentrator using thin film multilayer structuresProceedings of SPIE - The International Society for Optical Engineering. 103991A-103991A. 2017
2016 A concept for a soft gamma-ray concentrator using thin-film multilayer structuresProceedings of SPIE - The International Society for Optical Engineering. 99056L-99056L. 2016
2016 Deposition of Thin-Film Multilayer Structures for Soft Gamma-Ray ConcentratorSOCIETY OF VACUUM COATERS 59TH ANNUAL TECHNICAL CONFERENCE PROCEEDINGS, 2016. 463-468. 2016
2016 Sputter Deposition of Stainless Steel Coatings in Nitrogen/Argon AtmosphereSOCIETY OF VACUUM COATERS 59TH ANNUAL TECHNICAL CONFERENCE PROCEEDINGS, 2016. 334-341. 2016
2015 A soft gamma-ray concentrator using thin-film multilayer structuresProceedings of SPIE - The International Society for Optical Engineering. 96031E-96031E. 2015
2006 Tribological properties of sputter-deposited MoS2 films containing titaniumMaterials Research Society Symposium - Proceedings. 281-286. 2006
2005 Structural, mechanical and tribological properties of TiN and CrN films deposited by reactive pulsed laser depositionMaterials Research Society Symposium - Proceedings. 137-142. 2005
2005 The tribological behavior of MoS2-Cr films sliding against an aluminum counterfaceMaterials Research Society Symposium - Proceedings. 317-322. 2005
2003 Microstructure development and the mechanisms of lubrication in magnetron sputtered HfC-Ag and SiC-Ag composite thin filmsMaterials Research Society Symposium - Proceedings. 235-240. 2003
2003 Novel composite coatings with 3D coating architectures for tribological applications fabricated using semiconductor patterning processesMaterials Research Society Symposium - Proceedings. 273-278. 2003
2003 Structural and tribological properties of molybdenum disulfide/metal multilayered films deposited by pulsed laser depositionMaterials Research Society Symposium - Proceedings. 291-296. 2003
2002 Structural properties of carbon nitride films deposited by reactive - Pulsed laser deposition techniqueMaterials Research Society Symposium - Proceedings. 103-108. 2002
2001 Determining the limit of hardness in ternary carbide thin filmsMaterials Research Society Symposium - Proceedings. 9-14. 2001
2001 Structural and tribological properties of TiC/C/Ag coatings in vacuum and ambient environmentsMaterials Research Society Symposium - Proceedings. 273-278. 2001
2001 The effects of substrate temperature and bias on the structural, mechanical and tribological properties of TiC films deposited by magnetron assisted pulsed laser depositionMaterials Research Society Symposium - Proceedings. 419-424. 2001
2000 Phase formation and mechanical properties of multiphase carbide coatingsMaterials Research Society Symposium - Proceedings. 181-186. 2000
1998 Mechanical and tribological properties of ZrC/VC alloy films deposited by sputtering and pulsed laser depositionMaterials Research Society Symposium - Proceedings. 261-266. 1998
1998 Pulsed laser deposition of mixed metal carbide coatingsHARD COATINGS. 233-247. 1998
1998 The mechanical response of thin film substrates subject to ultrasonic joiningMaterials Research Society Symposium - Proceedings. 377-382. 1998
1997 Nanocomposite thin films of transition metal carbides fabricated using pulsed laser depositionMaterials Research Society Symposium - Proceedings. 419-424. 1997
1996 Structure and properties of TiC, VC and TiC/VC thin films deposited by pulsed laser depositionMaterials Research Society Symposium - Proceedings. 301-306. 1996
1995 Mechanical properties and microstructure of Cu/Cu-Ni and Cu/Ag multilayer thin filmsMaterials Research Society Symposium - Proceedings. 391-396. 1995
1994 PARTICLE PETROGENESIS AND SPECIATION OF ELEMENTS IN MSW INCINERATION BOTTOM ASHESStudies in Environmental Science. 111-136. 1994
1992 CHARACTERIZATION OF ULTRASONIC WIRE BONDED SUBSTRATESELECTRONIC PACKAGING : MATERIALS AND PROCESSES TO REDUCE PACKAGE CYCLE TIME AND IMPROVE RELIABILITY. 89-96. 1992
1992 YIELD STRENGTH ENHANCEMENT IN MULTILAYER THIN-FILMS BY MODULUS HARDENINGTHIN FILMS : STRESS AND MECHANICAL PROPERTIES III. 509-514. 1992
1991 INTERFACIAL REACTIONS IN ALUMINUM ULTRASONIC WIRE BOND SPECIMENS BONDED TO NI AND AU PLATED COPPER SUBSTRATESMATERIALS DEVELOPMENTS IN MICROELECTRONIC PACKAGING : PERFORMANCE AND RELIABILITY. 269-279. 1991
1987 HIGH-RESOLUTION AND ANALYTICAL ELECTRON-MICROSCOPY STUDIES OF INTERFACES NI3ALJournal of Metals. A64-A64. 1987
1987 THE EFFECTS OF HEAT-TREATMENT AND COLD-WORKING ON THE CRYOGENIC MECHANICAL-PROPERTIES OF FE-30MN9AL0.9CJournal of Metals. A23-A23. 1987
1985 WIDMANSTATTEN CEMENTITE PRECIPITATION AND GROWTH IN CARBURIZED AISI-9310 STEELJournal of Metals. A48-A48. 1985
1984 MECHANISMS OF EMBRITTLEMENT DURING TEMPERING OF CARTECH X-53 STEELJournal of Metals. 7-7. 1984
1983 A STUDY OF ADSORPTION AT ANTI-PHASE BOUNDARIES - STATIC AND MIGRATING INTERFACESJournal of Metals. A24-A24. 1983
1983 SOLUTE DRAG EFFECTS AT MIGRATING INTERFACESJournal of Metals. 32-32. 1983
1983 THE MORPHOLOGICAL STABILITY OF A SOLID WETTING LAYER ON A MIGRATING INTERFACEJournal of Metals. A60-A60. 1983
1980 THE EFFECT OF ADSORPTION ON THE MIGRATION OF ANTIPHASE BOUNDARIESJournal of Metals. 28-28. 1980

Teaching Activities

  • Diffractn & Image Mthds in MS Taught course 2018
  • Diffractn & Image Mthds in MS Taught course 2018
  • Seminar Taught course 2018
  • Doctoral Research Taught course 2018
  • Intro to Materials Science Taught course 2018
  • Intro to Materials Science Taught course 2018
  • Intro to Materials Science Taught course 2018
  • Intro to Materials Science Taught course 2018
  • Intro to Materials Science Taught course 2018
  • Intro to Materials Science Taught course 2018
  • Intro to Materials Science Taught course 2018
  • Intro to Materials Science Taught course 2018
  • Intro to Materials Science Taught course 2018
  • Intro to Materials Science Taught course 2018
  • Seminar Taught course 2018
  • Doctoral Research Taught course 2017
  • Seminar Taught course 2017
  • Thermodynamics & Kin Matrls II Taught course 2017
  • Doctoral Research Taught course 2017
  • Intro to Materials Science Taught course 2017
  • Intro to Materials Science Taught course 2017
  • Intro to Materials Science Taught course 2017
  • Intro to Materials Science Taught course 2017
  • Intro to Materials Science Taught course 2017
  • Intro to Materials Science Taught course 2017
  • Intro to Materials Science Taught course 2017
  • Intro to Materials Science Taught course 2017
  • Intro to Materials Science Taught course 2017
  • Intro to Materials Science Taught course 2017
  • Intro to Materials Science Taught course 2017
  • Intro to Materials Science Taught course 2017
  • Seminar Taught course 2017
  • Diffractn & Image Mthds in MS Taught course 2016
  • Diffractn & Image Mthds in MS Taught course 2016
  • Diffractn & Image Mthds in MS Taught course 2016
  • Diffractn & Image Mthds in MS Taught course 2016
  • Doctoral Research Taught course 2016
  • Seminar Taught course 2016
  • Doctoral Research Taught course 2016
  • Intro to Materials Science Taught course 2016
  • Intro to Materials Science Taught course 2016
  • Intro to Materials Science Taught course 2016
  • Intro to Materials Science Taught course 2016
  • Intro to Materials Science Taught course 2016
  • Intro to Materials Science Taught course 2016
  • Intro to Materials Science Taught course 2016
  • Intro to Materials Science Taught course 2016
  • Intro to Materials Science Taught course 2016
  • Intro to Materials Science Taught course 2016
  • Intro to Materials Science Taught course 2016
  • Intro to Materials Science Taught course 2016
  • Intro to Materials Science Taught course 2016
  • Doctoral Research Taught course 2015
  • Doctoral Research Taught course 2015
  • Intro to Materials Science Taught course 2015
  • Intro to Materials Science Taught course 2015
  • Intro to Materials Science Taught course 2015
  • Intro to Materials Science Taught course 2015
  • Intro to Materials Science Taught course 2015
  • Intro to Materials Science Taught course 2015
  • Intro to Materials Science Taught course 2015
  • Intro to Materials Science Taught course 2015
  • Intro to Materials Science Taught course 2015
  • Intro to Materials Science Taught course 2015
  • Intro to Materials Science Taught course 2015
  • Diffractn & Image Mthds in MS Taught course 2014
  • Doctoral Research Taught course 2014
  • Intro to Materials Science Taught course 2014
  • Intro to Materials Science Taught course 2014
  • Intro to Materials Science Taught course 2014
  • Intro to Materials Science Taught course 2014
  • Intro to Materials Science Taught course 2014
  • Intro to Materials Science Taught course 2014
  • Education And Training

  • B.E. Materials Science, Stevens Institute of Technology
  • M.S. Materials Science, Massachusetts Institute of Technology
  • Ph.D. Materials Science, Massachusetts Institute of Technology
  • Full Name

  • James Krzanowski